Resetting your LG 3D P920 is a piece of cake and requires no soldering. All you need is a Windows PC and a USB cable.

1. Switch off the phone, disconnect if from the PC;
2. Take out battery, write down IMEI that can be found on label in the battery bay, put battery back (if you already know your IMEI, then still cycle the battery);
3. Install the LG USB Driver and LGMobile Support Tool from the LG update site (Aussies on Optus go here);
4. Reboot PC;
5. Launch the LGMobile Support Tool;
6. Press – and keep pressed – the Volume Up button while connecting phone and PC via USB cable;
7. Desktop should install more drivers;
8. Update Tool should show phone as connected;
9. Select “Customer Support” – “Recovery Phone”;
10. Enter IMEI (no hyphens), “Check”, “OK”;
11. Support Tool closes, updater software launches after a few seconds;
12. Updater starts to download firmware;
13. Updater then connects to phone and uploads / resets phone;

If it doesn’t work, then don’t bang your head against a wall. Try the process again. I think I may have had to reboot once or twice until I got past step 7 & 8

Powered by Diego